80-97 Ford - Common Rail Engine Mounting Kit
Common Rail Engine Mounting Kit: $351
Motor Mounts : $260
(For Common Rail engines only, these motor mounts require either the relocation of the ECM or the fabrication of a mount perch on the driver side of the crossmember)
Bushing Kit: $15
(this contains a Water Temperature Sensor Adapter, Oil Pressure Sensor Adapter, a 3/8" Compression Coupler [for power steering], and a 3/8” T [for brakes ])
Ambient Temp. Sensor $76:
Instructions for these items are included with engine mounting kit. Also buy the Installation Manual (no wiring instructions included) for $25.00, or if you buy an adapter plate too you'll get it for free.
Tachometer Kits: $223-303
These allow you to use the existing Ford tach. We recommend a full tach kit for Common Rails.
| Tach Mount: | $49 |
| Tach Base: | $49 |
| Tach Sensor: | $80 |
| Tach Ring: | $125 |
Recommended:
A/C Manifold: $131
The ’94+ Dodge AC pump fits in your truck. You will need an AC manifold .You will have these lines connected with your Ford lines. This can be done at an AC shop, or even at some Napa Auto Parts stores.
*Please note that the parts listed above are not the complete conversion kit. Other parts may be necessary such as (transmission adapter plates) depending on how you are planning your conversion.
