80-97 Ford - 24V Engine Mounting Kit
* Note: 24V = 1998- 2002
24V Engine Kit: $332
Motor Mounts : $260
(these are bolt-in and come with heavy duty insulators)
Voltage Regulator: $42
(for using Dodge alternator [Nippondenso style])
Brushing Kit: $15
(this contains a Water Temperature Sensor Adapter, Oil Pressure Sensor Adapter, a 3/8" Compression Coupler [for power steering], and a 3/8” T [for brakes])
Instructions for these items are included with engine mounting kit. Also buy the Installation Manual for $25.00, or if you buy an adapter plate too you'll get it for free.
24V Wiring Sheet: $15
Tachometer Kits: $49-$303
These allow you to use the existing Ford tach. Some trucks need only a tach mount and some need all four parts.
Gas or Diesel applications.
| Tach Mount: | $49 |
| Tach Base: | $49 |
| Tach Sensor: | $80 |
| Tach Ring: | $125 |
Recommended:
Exhaust Manifold: $195
This manifold gives more clearance between the turbo and the a/c box. Re-orientation of the turbo is required. It is also necessary to buy our turbo exhaust adapter kit for $205. This is needed because the 24 valve turbo's have a fixed elbow on the back of the turbo, so connecting to the downpipe is not possible with the new orientation of the turbo.
A/C Manifold: $131
The ’94+ Dodge AC pump fits in your truck. You will need an AC manifold .You will have these lines connected with your Ford lines. This can be done at an AC shop, or even at some Napa Auto Parts stores.
*Please note that the parts listed above are not the complete conversion kit. Other parts may be necessary (such as transmission adapter plates) depending on how you are planning your conversion.
